Embedded Developer – Smart Programming

Getting Started

• Tools Setup
• Working with GDB

Introduction to ARM Cortex-M

• Basics of Computer Architecture 

• MCU V/S MPU 

• Introduction to ARM Cortex-M 

• Cortex-M0 Part 1

• Cortex-M0 Part 2 

• ARM Cortex-M4 Generic Guidelines 

• Systick Introduction 

• Systick by ARM 

• Systick Working 

• Systick Working Part 2 –

• Systick Handson 

• Assignment – Systick 

 Peripheral : UART

1. Understanding UART Protocol in detail
2. Understanding UART Hardware Block Diagram
3. Understanding UART Clock Generation ( BAUD Rate Calculations)

Peripheral : Ethernet Controller

1. Overview of Network SoC
2. Ethernet Hardware
3. Ethernet with NxP Evaluation Board
4. Ethernet with NxP SoC
5. Ethernet Controller
6. Ethernet Controller Configuration
7. Ethernet Controller Configuration  Demo
8. Physical Layer Device Configuration
9. PHY Configuration Demo
10. Ethernet Controller Transmit/Receive Data Structure
11. Analysis of Ping generated packets
12. ARM based Usecase

Project: UART and Ethernet Controller based 

This will be done by by board specific workshop Access. For example : TM4 Workshop

Linker script and start-up code

Debugging tips for board bring-up

Working with Networking tools

Certificate 

Participation certificate will be provided to all you apply for that.

Validity 

All online recorded material (except Special sessions) can be accessed 365 days from the date of enrollment.