December developer kit students will have double benefit. They will get recorded session done in past for firmware workshop and attend new live sessions on coding skills as well. Many key concepts of Embedded C and firmware will be discussed along with interview tips.
December firmware workshop will not be sold separately.
Embedded C – Live Sessions (Interview Tips with concepts)
- Preprocessor
- Operators
- Pointer
- Array and String
- Intel Architecture
- Functions
- C Project
- Typedef and Structure
- Structure Hands-on
Note: If someone is not interested for this live C sessions and Interview questions, we are considering Cortex-M and Thumb programming live sessions as well. Schedule will be decided based on available candidates.
Assembly Batch
Getting Started – Dec 10th*Sunday( , 12:30PM . Assembly specific topics will be discussed Mon-Wed (7PM-8PM) . This batch students will attend ARM bare metal programming with others from 8:30pm to 9:30pm (Mon – Fri) . You may refer to agenda given below under ARM Bare Metal Programming.
- Cortex M0+ Architecture
- Assembly Basics
- Write your first Assembly program
- Thumb Programming Hands-on
- How to use assembly to understand Embedded System Software ?
ARM Bare-metal Programming – Live Sessions
- STM32CUBEIDE Overview
- STM32 memory map
- STM32 clocking architecture and it’s importance in board bring-up
- Linker
- Linker Experiments
- Debugging concepts
- STM32 Register level programming
- Bare Metal Drivers :
- GPIO
- UART
- I2C
- ADC
- Two Mini Projects based on Embedded C with STM32
Recorded Videos of Previous Firmware Workshop
- Recorded Videos of Previous Firmware Workshop
- Pointer basics
- Typedef and Structure
- Structure Hands-on
- STM32CUBEIDE Overview
- STM32 memory map
- Linker
- Debugging concepts
- STM32 Register level programming
- ARM Cortex Use case
- Interrupt Handling
- Cortex M0+ Architecture
- Assembly Basics
- Thumb Programming Hands-on
- STM32 clocking architecture and it’s importance in board bring-up
- State Machine with embedded Usecase
- Bare Metal Driver – UART
- Bare Metal Driver -I2C
Access to Embedded Developer Kit and Weekend live doubt clarification
Time slots
Regular Batch:
- Weekdays batch: 8:30pm to 9:30pm
- Weekend batch: 11am to 2pm ( It can go beyond Nov or will be adjusted on Sundays as well)
Premium Kit:
- Ongoing batches 8am , 11am , 1pm during weekdays
- New batch : 6:30pm – 9:30pm on Sunday
How to register ?
One can register through RazorPay by 4th Nov .
EmailID : info@embedkari.com
Last date of registration : 15th Oct 2023